Staircase & Granite Cleaning

Clean stair treads, risers and granite surfaces where dust and traffic leave visible marks.

About the service

Stair edges, corners and risers can hold dirt even when the centre of a step is regularly cleaned. Granite can also collect residue that makes its finish look uneven. Specify whether you need stairs, granite surfaces or both cleaned, and describe the existing surface texture.

Where it can help

  • Stone staircases and landings
  • Granite surfaces with surface dirt or residue
  • Treads, risers and edges with visible buildup

How to discuss the work

  1. Identify the affected areas

    Share a full photo of the stairs or granite and a detail photo of an affected edge or corner.

  2. Provide dimensions

    Include the approximate number of steps or surface size when available.

Treads, nosings and landings

Count the affected steps and identify whether the landing is included. Show how the tread meets the riser and which areas collect marks. Mention whether stairs are the main access route so that the enquiry covers use of the space.

Another service to consider

If the same residue extends into a stone hallway or entry, also review stone cleaning.

Marble & Stone Cleaning

Which parts of a staircase should I photograph?

Show a full flight and a close-up of a tread, riser and nosing. Include any textured strips, landings and corners where dirt has accumulated. Mention if the same stone continues into the hallway.

Specify indoor or outdoor stone

Exposure and use can affect the type of buildup. Describe whether the stairs are sheltered, exposed or frequently wet so the enquiry covers the actual conditions.

What to check before you enquire

Show one full flight and a step close-up

Start with a photo that includes the lower landing, several steps, and where the flight turns or ends. Add a close-up of the front edge, the flat tread, and the upright riser. Note which part shows the most buildup. This makes it easier to understand whether you are talking about traffic marks on the treads, residue in corners, or a broader concern.

Describe the surface and its normal use

Mention whether the stairs are indoors, covered outdoors, or exposed to regular moisture and outdoor dust. If there is a textured edge, strip, or insert, include it in the photo rather than describing the whole flight as one finish. Note whether the stairs are the main access route and if the same material continues beyond the last step.

Count the landings and transitions

A stair enquiry can include a landing halfway up, a turning section, and the floor at the top or bottom of the flight. List which pieces form part of the scope. Add a photo of a transition into a hallway, doorway, or other finish if it needs attention. The number of treads alone does not describe how much stone is involved.

Raise loose edges or worn areas separately

If you see a chip at the front edge, a loose piece, or a join that has opened, say where it is. Cleaning and a defect in the step are separate concerns to discuss. Photograph the mark alongside the adjacent undamaged stone. Include whether it is one step or repeated along the flight, especially if the stair stays in use.

Put the scope into one message

Share photos and the staircase size or granite surface area. Add your area in Dubai and say which part of the work you want to discuss first. You can review the message and attach images in WhatsApp before sending.

Start a staircase & granite cleaning enquiry
Chat on WhatsApp